clock mechanism replacement,clock mechanism replacement repair parts,large clock hands shaft movement ,battery clock replacement mechanism accessory,watch wall clocks insert

Description:

1 set clock movement clock replacement mechanism , the broken clock can work again after replacing the movement, no need to new .
contains movement with hook, 2pcs hour hand, 2pcs minute hand and 2pcs (type 2 includes 4 pairs different style of hands), the accessories are also included.
The length of hour about 90mm/93mm, the minute about 120mm/127mm, about 100mm/3.94 inches (from the hole center to the terminal) long.
This clock dials from 0.2 in - 0.35 in thick, ornate sets for different options, perfect for your clock creations.
Suitable for DIY wall clock, wood wall clock, metal wall clock, craft clock, frameless wall clock, replace broken clock, etc.

Specification:

Material: , Metal
Colors: Black, red
Threaded Shaft Length: 11.7mm
Overall Shaft Length: 20mm
Movement Size: 56x56x16mm/2.2x2.2x0.63in
Battery: .5V AA battery (not included)

Installation Steps
1. Place metal hook over shaft.
2. Place washer over shaft.
3. Insert shaft through clock face.
4. Place dial plate brass washer over shaft.
5. Attach dail fixing brass nut.
6. Gently press hour hand onto shaft :00 postion.
7. Place minute hand over shaft :00 postion.
8. Gently screw minute place.

Package Includes:

1 Set Clock Movement

Note:

1. Be careful not to bend the hands with too much pressure.
2. tighten the nut too tight.
3. Press hard to get all clock hands in place.
4. Check hands are aligned.