QSP-4250-95 Heavy Duty Straight Centrifugal Pump

AMT QSP-4250-95 3" x 2" Cast Iron Heavy Duty Straight Centrifugal Pump, Buna-N Seal. 10 HP TEFC (Totally Enclosed, Fan Cooled), 1 Phase, 230/460 VAC/60 Hz, 26/13 Full Load Amps, 215JM Frame Motor. AMT Heavy Duty Solids Handling End Suction Centrifugal Pump are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90 increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pump are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pump are not self-priming and require flooded suction. Cast Iron Construction; Buna-N Mechanical Seal and O-ring; Stainless Steel Motor Shaft and Hardware; NEMA TEFC Single and Three Phase Motors; Optional Mounting Base Available for 182/184/215 JM Frames (A200-90); Self-cleaning Stainless Steel Impeller; Maximum Flow 500 GPM; Maximum Working Pressure 150 PSI; Maximum Head 194 Ft (84 PSI); Maximum Temperature Buna-N 180 F; Pedestal Version Models Available for Frame Models 145/182/184JM; NOTE: Dimensions are in inches and have a tolerance of +/- 1/4". NOTE: Electric supply for ALL motors must be within +/-10% of nameplate voltage rating (e.g. 230V +/-10%= 207 to 253).