PRV AUDIO 10 Inch Woofer Speaker 10W1000-NDY-4, 1000 Watts Program Power, 4 Ohms, 3 in Voice Coil, 500 Watts RMS, Unique Sound Reproduction Midbass Woofer Driver for Pro Car Audio (Single)

Hero image 0 of PRV AUDIO 10 Inch Woofer Speaker 10W1000-NDY-4, 1000 Watts Program Power, 4 Ohms, 3 in Voice Coil, 500 Watts RMS, Unique Sound Reproduction Midbass Woofer Driver for Pro Car Audio (Single), 0 of 4

PRV Audio

PRV AUDIO 10 Inch Woofer Speaker 10W1000-NDY-4, 1000 Watts Program Power, 4 Ohms, 3 in Voice Coil, 500 Watts RMS, Unique Sound Reproduction Midbass Woofer Driver for Pro Car Audio (Single)

(No ratings yet)

Key item features

To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
Highlights 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 4 ohms 500 watts continuous program power rating makes high acoustical output 36 mm peak-to-peak excursion before damage 97 dB sensitivity, which makes it capable of generating a lot of output! Detailed vocal reproduction on a wide frequency band response
The 10W1000-NDY-4 is an extremely efficient 10″ woofer from PRV Audio. To stand up to the use and abuse of the professional sound environment we designed a 3″ CCAW voice coil that is wound inside-outside on a fiberglass former and features a generous 18 mm winding length for extended Xmax and less distortion. (with a suggested 80 Hz, 12 dB/octave high pass filter in place)! Its powerful optimized neodymium motor is vented to provide excellent cooling.

Specs

Rms power rating
500 W
Woofer size
10 in
Subwoofer type
Subwoofer
Brand
PRV Audio
Impedance
4 ohm
Peak audio power handling
1000 W

Current price is $231.73

Price when purchased online

Out of stock

How do you want your item?

Out of stock

Report an issue with this seller

About this item

Product details

PRV AUDIO 10 Inch Woofer Speaker 10W1000-NDY-4, 1000 Watts Program Power, 4 Ohms, 3 in Voice Coil, 500 Watts RMS, Unique Sound Reproduction Midbass Woofer Driver for Pro Car Audio (Single)

To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
Highlights 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 4 ohms 500 watts continuous program power rating makes high acoustical output 36 mm peak-to-peak excursion before damage 97 dB sensitivity, which makes it capable of generating a lot of output! Detailed vocal reproduction on a wide frequency band response
The 10W1000-NDY-4 is an extremely efficient 10″ woofer from PRV Audio. To stand up to the use and abuse of the professional sound environment we designed a 3″ CCAW voice coil that is wound inside-outside on a fiberglass former and features a generous 18 mm winding length for extended Xmax and less distortion. (with a suggested 80 Hz, 12 dB/octave high pass filter in place)! Its powerful optimized neodymium motor is vented to provide excellent cooling.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Rms power rating

500 W

Woofer size

10 in

Subwoofer type

Subwoofer

Brand

PRV Audio

Warranty

Warranty information

PRV Audio Limited Component Warranty PRV Audio warrants that all new Speakers, Tweeters, Compression Drivers and repair kits are free from any manufacturing defects in materials or workmanship under normal usage for a period not to exceed (1) year from the original purchase date. That is, the date the speaker leaves the PRV Audio warehouse. This warranty is valid for the original purchaser and is not transferrable. Be prepared to provide receipt of purchase if requested. If for any reason service is needed to be performed under this warranty, PRV Audio will repair or replace the defective equipment to be returned functioning. If the speakers were working, then suddenly stopped playing or started to make noise, there is a good chance the voice coil has become damaged. This can happen in many ways but in any case, it is not covered under warranty. The warranty will only cover manufacturing issues. All speakers believed to be defective must be sent back for our review to verify any manufacturing defects. How to return your component for warranty review In the event you need to return your PRV Audio speaker for review you must first obtain a Return Authorization (RA) number. Complete the form below in its entirety. Once the information for the RA request has been received, we will send a reply with instructions to send the defective speaker for warranty repair, providing it is still within the warranty period. Please be sure to diagnose your speaker thoroughly. Speakers found to have no defects may be charged return shipping. Pack the speaker very well to prevent shipping damage. Write your assigned RA number on the outside of the shipping box for identification purposes. If the voice coil is found to be damaged you will be responsible for purchasing a repair kit, repair fee and or return shipping costs. If no repair kit is available for your product a new product will need to be purchased. If there is no issue found, you may be responsible for return shipping. What is not covered under this warranty Burned voice coils from overheating or DC voltage. Broken speaker baskets. Broken or creased cones due to abuse or other physical damage. Damaged dust caps. Broken diaphragms from low frequency. Previously reconed speakers. Broken speaker terminals. Complete speaker destruction. Fire damage, water damage, lightning strikes or other Acts of God. Excessive excursion causing damage to voice coil former, damage to cone or spider suspension, damage to diaphragms from contacting the phase plug. Return shipping costs for speakers found to be functioning properly. Shipping costs to send the speakers for warranty review. Speakers returned without prior authorization. Warranty claims are normally processed within (1) week providing that products and or parts are available to perform necessary repairs in a timely manner.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.