FRM220-10/100i-SC080 Fast Ethernet to SC singlemode managed fiber media converter, long-haul 80km

The FRM220-10-100I-SC080 Fast Ethernet fiber media converter is a 10/100Base-TX to 100Base-FX long-haul single-mode 1550nm converter reaching up to 80Km distance. Unit supports web-based and in-band management including powerful features like Bandwidth Limiting, Dying Gasp, Link-Loss-Forwarding, Remote-Monitoring-Status and Loop-Back-Test. FRM220-10-100I-SC080 can be managed when inserted into an FRM220 series chassis equipped with an FRM220-NMC management card. Remotely connected converters can be managed in-band over the fiber. Up to 8 big FRM220-CH20 chassis can be controlled with a single management card. The FRM220 series converters are extremely versatile, being available in several versions of power supply: external AC adapter, embedded internal AC power, embedded internal DC neg. 48V power or dual combo embedded AC and DC power supply. Same model can also be installed in the FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile model allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. The FRM220-10-100I-SC080 Fast Ethernet media converter is a very powerful choice for media converter solution for data carriers and service providers. Technical specifications Interfaces: One RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX and one 100Base-FX built-in fiber port for 802.3u standard Connectors: One RJ-45 copper 10/100 Mbps and one dual SC optical port 100Base-FX UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 2046 bytes - switch/ 9K bytes - converter Optical slot: 1 x 9 dual SC transceiver, 1550nm, up to 80Km on 9/125um single-mode fiber Front LEDs: Power, FEF, FX-Link, TX-SPD, Tx-Duplex, Tx-Link Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug Temperature: 0-60°C (Operating); -10-70°C (Storage) Humidity: 10 90% non condensing Consumption: less than 4W Dimensions(WxDxH): 88mm x 155mm x 23mm Weight: 340g (without AC adapter) Compliance: CE, FCC Class A, LVD, RoHS MTBF: 65,000 hours