BuyPlastic Dolphin Grey HDPE Boat Board, Marine Grade Plastic Sheet 3/4" x 12" x 12" , High Density Polyethylene Panel

This is a 3/4" thick, 12" × 12" (measures 11.8" × 11.8") piece of SIMONA BOATBOARD® Marine Grade in Dolphin Grey. This marine-grade HDPE has a matte finish on both sides and a removable protective masking on one side. MATERIAL INFORMATION HDPE BoatBoard proven in extreme marine conditions. Maintenance-free integral colors. Long-term durability for boat building components, outdoor and indoor cabinetry. In boat building components, this tough, UV resistant sheet withstands long term exposure to intense sun, salt water and rigorous use. This also makes it ideal for outdoor patio, poolside and marina cabinetry, furniture and accessories. Its impact resistance, FDA compliance, easy-to-clean surface and attractive appearance enhance indoor medical, clinical and laboratory cabinetry as well. HANDLING & CARE To clean everyday dirt and stains, use a cleaner such as Soft Scrub® and a nylon scrubby or stiff nylon brush. Scrub lightly; excess force can mar the finish. For persistent stains and marks, use a bleach solution (not 100% chlorine), Goof Off®, Mr. Clean Magic Eraser®, or GOJO® Orange Pumice Hand Cleaner. To clean a petroleum stain such as grease or oil, use a citrus cleaner, alcohol or mineral spirits. In severe cases, spray stains with WD40®. Then, use toluene or acetone and a white nylon scrub pad. Do not use MEK, turpentine, or naphtha solvent. BUYPLASTIC GUARANTEE At BuyPlastic, we are dedicated to your complete satisfaction. If your purchase does not fully meet your expectations, please contact us for a quick and favorable resolution.