This Sauers & Company Veneer 3M™ PSA (Pressure Sensitive Adhesive) Edge Banding is one of the easiest to use and apply. This particular edge banding is an all-natural wood veneer product that has been pre-sanded and backed with 3M 9505 Adhesive Transfer Tape. This heavy-duty tape, 4.9 mils (0.12mm) thick, provides a superior bond on virtually any surface. To achieve maximum bond strength during installation, the surface should be thoroughly cleaned and dried. It will also be necessary to provide pressure, 10-15 PSI, during installation to allow the adhesive to come in contact with the substrate. A veneer roller works well for this task. Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project. Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species. Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed. Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed. Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed
WARNING: 