Product description:
This is a relay signal amplifier using the latest 11AC dual band wireless WIFI standard technology; The repeater can search the network signals in 2.4G and 5G bands at the same time, with the maximum transmission rate of 1200Mbps (2.4G/300Mbps and 5G/867Mbps); Low interference and excellent performance of data transmission with 5GHz channel. It allows you to enjoy high-speed Internet surfing like wired network in a wireless way
This product is equipped with four external antennas to provide better wireless performance, transmission rate and stability. The technology can automatically avoid channel conflicts. Channel selection features can expand and strengthen your wireless signal, allowing you to enjoy wireless anytime. In addition, one Ethernet port (10/100Mbps) is configured to allow the extender to connect wired devices as a wireless adapter. You can directly connect any devices such . It can maintain multiple simultaneous HD streaming media, online games and other content consumption Three side heat dissipation design is adopted to ensure fast cold of the extender during operation, improve service life and WiFi stability.
Function:
Wireless standard:IEEE802.11AC/a, IEEE802.11N/B/G
Frequency: 2.4GHZ&5GHZ
Coverage：160 m² Transmission rate up to 1200Mbps
Four external antennas make the relay signal more stable
RJ45 network port supports wired access
WPS 1 key encryption button
Relay mode: Sometimes a device may be in the living room, but because the signal is poor, the bedroom signal may have one grisds, which requires further expansion of the wireless network. At this time, you can consider using the relay mode to expand the network. The name of the "amplified" wireless signal is the same as the begin wireless router signal name by defaults , or you can change the settings according to your habits. When setting the repeater, it needs to connect to the upper router signal and keep the connection signal in good condition, which is conducive to expanding the stability of the network signal.Features: Through wireless to wireless, 1:1 copy a wireless network and amplify the signal to expand the coverage.Applicable scenario: expand the network to achieve signal "coverage" within a certain range
Another mode: The mode is special. Generally, the A.P hotspot device has this function. At the same time, the A.P device does not have bridging and routing modes, but it supports the relay function. The difference between relay and A.P hotspot is also easy. The relay mode is actually 1:1 replication of a wireless network, and no cable connection is required. Both routers and A.P devices support this mode; The A.P mode uses network cables to expand WiFi signals, but it is not responsible for managing the network itself. It is equivalent to a change with wireless functions, which converts wired signals into wireless signals. Other functions need to be implemented by routers (IP distribution, network management, etc.)Features: It is converted into a wireless network through network cables, and has no management and routing functions.Applicable scenario: It covers the dead corner of the signal. Its function is similar to that of the relay, but the A.P device does not need to be configured. It is plug and play
Product parameters: Interface:1 x 10 / 100M LAN,Port
Standards :IEEE802.11AC/a, IEEE802.11N/B/G
Input power: AC 100 - 240V, 50/60Hz
Wireless signal rate: 2.4GHz: up to 300Mbps; 5GHz: up to 867Mbps (dynamic)
Wired transmission rate: 10/100Mbps
Wireless security: support 64/128 bit WEP, WPA - PSK/WPA2 - PSK, 802.1X
Product size: 18x5.6x3.3cm/7.09x2.20x1.30 inch
Package size: 20x6x5cm/7.87x2.36x1.97 inch
Gross weight: 145g/ 0.32 lb
The Package Include:
1 x Wifi repeater (us plug)
1 x Use manual
