H4 LED Headlight Bulbs for 1997-2004 Honda CR-V High and Low Beam Plug & Play 14000LM 6000K, 2 Bulbs

Product Details:

Plug Type: H4/9003/HB2/HS1
Light Mode: Signal Beam
Package includes: 2 bulbs
Internal/External Drives: Internal
Number of LEDs: 2-Sides COB chip
Optical power: 60W/bulb
Luminous flux: 7000LM/bulb
Color temperature: Bright white 6000K
Voltage: DC 9-36V
Lifespan: More than 50000 hours
Certification: IP68 waterproof and dustproof
Guarantee: 30-day free returns and 3-month worry-free warranty. If the LED bulb you received does not fit or is defective or has an incompatible problem, please contact us and we will send you a replacement or refund.

Description of H4 High Beam and Low Beam Bulbs:

Plug and play, it fits more than 95% of vehicles without modifying the OEM dust cap. The built-in drive fits perfectly into most vehicles without mounting issues.
60W/set, 14000LM/set. 2-sided COB chip that provides more illumination with lower power consumption, it can be 300% brighter than the factory's halogen bulbs.
1:1 design, easy to install. The driver of the H4 LED bulb is built into the bulb. Simply remove the halogen bulb from the case, then place the LED bulb in and cover it with a dust cover.
360° adjustable beam mode. The bulb's mounting ring can be gently adjusted to fit different headlight housings at different angles. By default, the beam mode is set correctly, but it can be freely adjusted by rotating the back of the cooling fan. There are no black dots, and the pattern is focused to near perfection.
The LED bulb adopts an all-aviation aluminum body, a hydraulic fan and a built-in intelligent IC and temperature control system, which can perfectly solve the problem of light decay and dead lights caused by the highest temperature of LED lights, ensuring a longer service life.
Need a Canbus decoder/resistor?The H4 LED bulb combo will work well on most vehicles. However, when it changes to LED to cause the vehicle to flash or error codes, you will need a pair of decoders to eliminate the error. If the cooling fan of the LED bulb is too large, you may need to make some modifications to the dust cover.