These are lowering kits that will lower your 82-04 two-wheel drive S-10 chassis just a little bit or put it in the weeds. Inches of drop are approximate and vary with car and engine weight. Western Chassis 825520 1982-2004 S-10 Front Coil Springs, 3 Inch Drop Rate optimized for the V6 Regular Cab chassis. Designed for performance and ride quality. High Quality made to OEM specifications. Heavy-Duty Powder Coat Finish. Note: If using with the lighter 4 cyl. chassis, springs will only have a 2" drop. Item Details Free height is 12.5" 680 lb rate Western Chassis 821013 1982-2004 S10 Dropped Rear Leaf Springs, 4 Inch 3 leaf assembly. Designed for a smooth ride. 3” lowering height. Complete with OEM style “Silent Block” bushings. Quick and easy install. Speedway 1982-04 Chevy S10 Pickup Truck 2 Inch Drop Spindles More and more people are turning to the Chevy S-10 pickup chassis as a building block for their hot rod. But it seems in most applications the front sits too high and doesn't quite look right. These 2" drop spindles fit the '82-'95 S-10 pickup two-wheel drive front suspension and accept the original rotors and calipers. Western Chassis 55830 DS2 S10 Rear Shock, 3-4 Inch Drop / Western Chassis 50817 DS2 S10 Front Shock, 2 Inch Drop High performance valving. Hardened chrome piston rod. Low friction Teflon seals & guide bushings. Nitrogen pressurized. OEM style mount bushings. 2 Inch Drop S10 Lowering Blocks 2 Inch Drop. Western Chassis 52118 Rear Frame Notching Kit Provides frame clearance for rear axle on lowered cars. Gain clearance without sacrificing strength (3/16" thick material) 6-3/4" side to side and 2-7/8" from bottom to top. Fits frame rail as wide as 2-1/2" Fit and weld into your frame. Includes a pair of rubber bump stops. Included in this Kit: (1) Pair, Drop Spindles (1) Pair, Front Coil Springs (1) Pair, Lowering Blocks (1) Pair, Dropped Leaf Spring (1) Pair, Rear Frame Notching Kit (1) Pair, Front Shocks (1) Pair, Rear Shocks
