Galaxy Audio CPTS0000 Cricket CPTS XLR Audio Polarity Continuity Test Set

The CRICKET Polarity/Continuity tester is great for sound contractors, musicians, DJs, and many others. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same electrical or acoustic tone (frequency), and one of those sources is in a state of inverted polarity, those tones, when combined at a given point, will cancel each other. This severely alters the sound of a system.

• Checks continuity and polarity
• 1/4" TRS and XLR in/out
• Tests speakers, mics, cables and wireless systems
• Tests mixers and signal processors for polarity inversions
• Internal speaker for testing mic polarity
• Internal mic for testing speakers
• High level output for testing miles of cable
• Battery test on Receive module saves troubleshooting time
• Easy access pockets on fabric shell allow clip-on gel attachment
• Light controlled with fold-up accessory fabric Egg Crates.
• Mic Sensitivity -64dB, +3dB
• Speaker Output Pulse Accepts 2 ohm (or greater) load with positive pressure produced at the tip of a 1/4" speaker jack and positive terminal of an internal speaker

• Red: indicates negative-going pulse polarity.
• LED Indicators Green: indicates positive-going pulse polarity with power switch in "ON" position and battery status with power switch in "BAT" position.