VONTER 100A/60A/40A MPPT Solar Panel Regulator Charge Controller 12V/24V Auto Focus Tracking

Features:

• 1. Industrial-grade master chip, 16 AD sampling accuracy, temperature, charging current,
• discharge current accurate real-time display, power generation at a glance.
• 2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection
• during charging, bidirectional focusing tracking.
• 3. Large-screen LCD display, adjustable charging and discharging parameters. UItra-wide charge
• and discharge adjustable, as long as you understand the characteristics of the battery set its
• corresponding charging parameters, you can charge a battery. When the output is off, the time
• can be adjusted, which is more convenient. (on the market, there is no point adjustment)
• 4. Acomplete three-phase charge management, effectively protect the battery, the battery is more
• durable.
• 5. Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection
• protection,when the fault is eliminated, the controller automatically recovers, does not damage
• the device.
• 6. Bidirectional MoS tube anti-backflow circuit, high-power charging mode, low heat.
• 7. R5. 0 solar charging DC plug, R5. 0 DC lamp output DC plug, convenient connection.

Specifications

• ✔1. Rated voltage: 12/24V
• ✔2. Rated current: 40/50/60/100A
• ✔3. Max. PV voltage: 50V
• ✔4. Max. PV input power: 750W(12V) / 1500W(24V)

Function:

• 1. Always keep the battery on fill voltage condition.
• 2. Prevent the battery from over-charging.
• 3. Prevent the battery from over-discharging.
• 4. Prevent the battery from reverse charging to solar panels during
• nights.
• 5. Reverse Polarity Protection for Battery
• 6. Reverse Polarity Protection for Solar Panels
• 7. When the battery voltage is low, the controller will
• automatically cut off the load from the system. If the voltage of
• battery is back to normal and the load will restart working.
• 8. Thunder protection
• 9. According to the battery voltage grade, the controller can
• automatically set charge-off voltage, the load-off voltage, the
• load- restore voltage. (The parameter is default under 25℃
• condition, locked by the CPU procedure, cannot adjust.)
• 10. The controller will automatically compensate the temperature of
• the charging voltage according to the changes of ambient temperature.

Package Includes：

• ➤1 x Solar Panels Battery Charge Controller
• ➤1 x User Manual