FMUX1001 - modular E1, T1, POTS, serial and Gigabit Ethernet fiber multiplexer with redundant power slots

The FMUX1001 is a 1U, 19" rack mountable, PDH fiber optic multiplexer that transmits up to 16 channels plus a 10/100/1000Base-T Gigabit Ethernet channel over a single fiber optic link. The FMUX1001 chassis supports redundant power and hot swappable design. The AC supplies operate from 100~240VAC while DC supplies operate from 18~60VDC. From the rear of the chassis, one to four hot swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530) or FXO/FXS voice cards are supported. The standard FMUX1001 configuration may be viewed or set via the front panel LCD/menu keys, serial VT-100 terminal connection, Telnet, web HTTP or SNMP. Features -1U, 19 (23) 4-slot chassis -16 E1 (2.048Mb/s) or 16 T1 (1.544Mb/s) Multiplexer with 100/1000Mbps Ethernet and RS-232 data (async) Interface -RS-232 port for system console -One alarm output port and one Order Wire port (RJ11 for handset) -4x 10/100/1000Base-T Ethernet ports -SNMP management -LCD plus menu keys for local configuration -Port based VLAN, tag based VLAN & bandwidth control -Telnet and web based remote configuration -2 plug-in SFP slot for optical SFP module -Forward 1024K byte packets on Ethernet port Technical SpecificationsOptical Interface: SFP slot, data rate 1.25G, Bit Error Rate Less than 10-11SFP options: fiber MM 62.2/125μm, 50/125μm, SM 9/125μmSFP max. distance: MM 2km. SM 15/30/50/80/120km, WDM 20/40/60/80kmElectrical Interfaces: Console, SNMP RJ45, Ethernet 4x RJ45, Alarm RJ45Standards: E1:ITU-T, T1:ITU-T, AT&T, ANSI, Ethernet: IEEE802.3xLED Indicators: PWR, Alarm, Phone, ACO, Port, ChannelsPower Input AC module IN : AC 90 ~ 264V, Out : DC 12VPower Input DC module IN : DC 18 ~ 72V, Out : DC 12VPower Consumption Dimensions: 250 x 438 x 43mm (D x W x H)Weight: 3.58 kgTemperature: 0 ~ 50°C (Operating), 0 ~ 70°C (Storage)Humidity: 10 ~ 90% non-condensingCertification: CE, FCCMTBF: 50,000 hrs