KriKac TPT500.4 Compact 4 Channel Car Audio Amplifier, 4 x 125 Watts at 2 Ohm, Mini Stereo 12 Volts Full Range Class D Amp Bridgeable

KriKac Compact 4 Channel TPT500.4 Car Audio Amplifier 4x 125 Watts at 2 Ohms Mini Stereo 12 volts Full Range Class D Amp Bridgeable Small Footprint Technology! KriKac amplifiers raise power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 8090% in a compact Class D full range amplifier. COMPACT DESIGN Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a highspeed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions 3.93 depth x 5.02 width x 2 heightPOWER This amplifier is designed to run your stereo system with the power it needs to perform! 500 Watts dynamic RMS power output of 4x 125 Watts at 2 Ohms per channel. Its high efficiency rate of 87% provides more power with less battery consumption.BRIDGEABLE Double the power output to your speakers by bridging two channels. The minimum impedance of 4 Ohms per bridged channel at an output power of 2 x 225 Watts RMSTECHNOLOGY A smart electronic 2way protection circuit the amp if it gets too hot or if speakers fail to cause a short! Focusing in sound quality, a full range response of 10 to 24,000Hz was used to give the best sound reproduction on this tiny amplifier.FEATURES Heavy Duty 10 Gauge power and speaker wire Inputs. Builtin crossover filters for easy tuning! Choose between a fixed HPF at 90Hz or LPF at 90Hz 45Hz Bass or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Control. Level controls are not for adjusting volume. They adjust the amount of that is coming into the amplifier from your source. Before Installing You must follow the for the products installation and connections to optimal performance. If you have any questions, get in touch . Before using the amplifier, always follow these guidelines Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment to the amplifier Keep all cables as far away as possible from the ignition cables, electronic injection modules, and starter switch since they may cause noise interference Always use 100% Copper cables and good quality connectors. This the sounds quality and fidelity To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important Use a fuse 12 inches away from the battery as a safety precaution The powerrated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 1Khz with THDN to 10% in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended. KriKac TPT500.4 Compact 4 Channel Car Audio Amplifier