Q10 Windshield OBD2 GPS HUD Speedometer Scanner With Navigation Fuel Consumption For Most Vehicles After 2008

Product Features:

1. Stereoscopic imaging. Display the information three-dimensionally through the translucent semi-reflective lens. No reflection, zero ghosting, and clearer display during daytime.

2. Powerful and practical function display, such as speed, water temperature and voltage, etc. HUD could eliminate the fault code displayed on the engine dashboard without professional equipment.

3. Early warning of the high water temperature and low voltage to avoid Car breakdown.

4. OBD2 GPS dual mode is suitable for all car models.

5. With Bluetooth Live Navigation, APP supported: Wins

Navigation system use

Please search Wins in App store to download . or scan the below QR code to download and install. Steps as below.

1.Confirm the APP installed successfully, and HUD is working. Open the mobile Bluetooth,GPS,internet. Click the Wins App,the mobile phone will auto connect with the HUD via Bluetooth.

2.If the mobile phone cannot connect to the Bluetooth device correctly, please follow the instructions below: HUD host needs to display normally. If the OBD system is unable to connect, please switch to the GPS system,and display normally. Check the mobile Bluetooth whether connected to other devices or not, if yes, please delete the paired Bluetooth device, and connect to WYHUD

3. Turn off the Bluetooth and then turn it on, or restart the phone (for more questions, please refer to the troubleshooting)

1. OBD mode information display: vehicle speed, water temperature, voltage, fuel consumption, RPM, single mileage, total cumulative mileage, travel time, driving direction, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, read data stream, Navigation.

Alarm: Overspeed alarm, Speed alarm, High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, Free switching between kilometer and miles, KM/h & MPH Switch freely, °C & ℉  switch freely.

   2. GPS mode information display: speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test. Navigation

Alarm: Overspeed alarm, Low voltage alarm, Free switching between kilometer and miles.

Specifications:

Material: ABS

Colour: Black

System: OBD2 GPS dual mode

Ambient temperature: -40°C -80°C atmospheric pressure 86-106kPa

Relative humidity: 10%-95% Environmental noise ≤60dB(A)

Alarm level: ≥30dB(A)

Working voltage: 11~18VDC (12VDC/200mA)

Product size: 110*77*42mm/4.33*3.03*1.65"

Applicable models: suitable for all cars

Kindly Attention:

OBD2 mode Working voltage: 11~18VDC (12VDC/200mA),when the voltage is higher than 24V, please use a USB cable for GPS mode.

System selection: When HUD is power on, pull up the setting button to select the language and systems. Default system is OBD.

If OBD Data can't shown correctly, please kindly contact us to check OBD compatibility.

Package Include:

1 * HUD Main Unit

1 * OBD2 Cable

1 * Non-slip Mat

1 * Clean cloth

1 * User Manual

1 * Original Box