Fuel Tank Filter Assembly B10-AL 496 Diesel Water Separator Replacement Fuel 30 Micron Max 25 Gpm 150 Psi 1" NPT Top Cap
Specification
You can choose for yourself:
1x Fuel tank filter assembly + 1 wrench + 1 adhesive tape
1x Fuel tank filter assembly + 1 piece of filter elements + 1 wrench + 1 adhesive tape
1x Fuel tank filter assembly + 2 filter elements + 1 wrench + 1 adhesive tape
1x Fuel tank filter assembly + 3 filter elements + 1 wrench + 1 adhesive tape
1x Tank filter assembly + 1 adhesive tape
10 x water filter fuel
1. Suitable for common fuels such as unleaded gasoline, diesel, fuel oil, up to 100%. 20% biodiesel and related additives.
2. Keeping a clean 496-5 filter in your vehicle can reduce damage to your vehicle. your engine and other fuel delivery components. 30 microns, provide high flow rates and efficiency. superior filtration, protects fuels from particles such as rust, sand, dirt and other materials. and water.
3. With protective sheet to prevent the filter element from being destroyed or deformed. by preion.
4. With inlet and outlet of 1"NPT pipe fittings marked at the top of the cap.
5. Use 495 fuel tank filter bowl, it is easy to visually monitor the fuel flow, the fuel flow will slow down when you need to replace the element. Drain valve installed at the bottom to drain water.
6. Key and additional aortic strip for easy installation and replacement. Max flow 25 gpm. Preion of work until 150 psi. The flow rate by gravity is approximately 5 gpm.
Installation
Attach the filter top cap to the filter. Place the storage tank valve over the opening marked “IN”
Attach the hose and nozzle to the outlet. Place the filter opening marked “OUT»
When installing the element and bowl, apply a coating of oil to each side of the filter opening. of the joint
These components must be tightened properly. by hand only.
Excessive tightening of the filter bowl will cause difficulty in removing the filter bowl. at a later date
When assembly is complete, check for leaks.
Package includes
1x Tank Filter Assembly fuel filter with 2 filter elements + 1 key + 1 adhesive tape
If you need more parts, please contact us directly. Our factory has the capacity to to produce a large number. Thank you very much.
