Notes:
**The vehicle compatibility list of the platform is not 100% correct. Please confirm the part number before purchasing.
**It is your responsibility (as the buyer) to ensure you are purchasing the correct part and understand the risks/replacement work/how to install compatible.
Vehicles vary from region to region. If you are not 100% sure, please check its item with your local VW specialist or Google it on the forum.
Description:
For this filter, during servicing only the filter element is replaced, the shell and its internal components remain for the balance of the vehicle's life.
This filters is located in the fuel line of your vehicle and help prevent fuel contaminants, such as dirt and rust particles, from entering the fuel delivery system to
help keep the engine running properly. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Features:
1) High filtration efficiency.
2) Low flow resistance.
3) High dust holding eapacity.
4) Airflow uniform distribution.
5) Trap fuel contaminants before they enter the vehicle's fuel delivery system.
Specification:
Condition: New
Type: Fuel Filter with Seals
Fitment Type: Direct Replacement
OE Part Number:
TP-1015, TP1015, 23304096, 49243.
Compatibility Model:
(Compatibility is just for reference, please confirm your OE number.)
For Chevy
--Cruze 2014-2015 2.0L L4 Turbo DIESEL VIN:Z
--Cruze 2017-2018 1.6L L4 DIESEL VIN:E
--Silverado 2500HD 6.6L V8 Turbo DIESEL VIN:Y
--Silverado 3500HD 6.6L V8 Turbo DIESEL VIN:Y
--2017-2022 Chevrolet/GMC 6.6L Duramax 2500HD/3500HD
--2020-2022 Chevrolet/GMC 3.0L Ecodiesel Duramax 2500HD/3500HD
For GMC
--Sierra 2500HD 2017-2018 6.6L V8 Turbo DIESEL VIN:Y
--Sierra 3500HD 2017-2018 6.6L V8 Turbo DIESEL VIN:Y
Package including:
6X TP1015 Fuel Filter
Installation:
1. Put a pot under the fuel filter housing,use a 1-7/16” socket wrench to leak some fuel.
2. Unscrew the cap with the old filter,and put them into the pot.
3. Clean the fuel filter housing cap,change the provided 2 O-rings,and change the filter.
4. Screw the combination of the new filter and cap onto the housing with the wrench.
5. Cycle the key to activate the electronic fuel pump in the tank(To prime the system,no need to bleed). Then start it and check for leaks.
6. Reset the fuel filter indicator,press and hold the “select” button until you get a beep,cycle the key,then done.
Tips:
1. Due to the light and screen difference, the item's color maybe slightly different from the pictures. Please understand.
2. Please allow 1-2cm differences because of the manual measurement.
