Specification:
LED String/Strip Type:LED String Fairy Lights Copper Wire
Material:Copper Wire
Wire color: Copper
Light Color: Colorful / White/ Warm White
Size: 10m/32.8ft, 20m/65.6ft
LED Quantity: 100 LEDs /200 LEDs
IP Rating:IP44
Amperage:12A
Output Voltage:12V
Power Consumption:10 W - 24 W
Lumens:200 lm - 399 lm
Control Style:Remote Control, Voice control
Lighting Technology:LED
Theme: Fairytale & Fantasy
Power Source:3 AA Batteries(Not Included)
Features:Waterproof
Installation Area:Indoor & Outdoor
Room:Living Room, Bedroom, Office
Occasion:All Occasion, Wedding, Christmas, Birthday, Party, Anniversary, etc.
Package Included:
1×LED Light String (With battery box, Not Included Battery)
1×Remote Control(Included Battery)
Introduction of Remote Control Voice Control Mode:
Mode 1: The action is mode 2~4 three kinds of cycles, change to another in 10 seconds; after no sound, it will enter the light breathing light for 1 second
Mode 2: The action mode is that the left street light bounces with the music for 1.5 seconds --> the two channels simultaneously bounce for 1.5 seconds --> the right channel bounces for 1.5 seconds at the same time --> the two channels simultaneously bounce for 1.5 seconds --> the left street light bounces with the music Bounce for 1.5 seconds, and loop like this; 1 second after there is no sound, it will enter the slightly bright breathing light
Mode 3: The action is two simultaneous music beating; after there is no sound, it will enter the slightly bright breathing light
Mode 4: The action is music for one beat, the left street light jumps once, then another beat, the right street light jumps once; this way, left and right; after no sound, it will enter the slightly bright breathing light
The default timing of power-on is 6-18H cycle. Long press the button for 1.5 seconds and flash 2 times to cancel the timing. Long press the button for 1.5 seconds and flash 3 times to retiming. During timing, pressing the function button does not affect the timing. Pressing the remote control TIMER button prompts flashing 2 The second time is to cancel the timing, and the reminder flashes 3 times to re-timing.
Bright and dark adjustment is the default bright, down to 4 gears, a total of 5 levels of brightness.
All buttons have a prompt function. The prompt flashes once, indicating that this function is restarting.
No voice control is 8-segment pattern flashing mode, plus switch is 9-segment. Only the 1234 button with music symbol is voice-activated, and the default voice-activated 1 mode is power-on.
