SHENKENUO 9012/HIR2 LED Headlight kit Bulbs Fit for 2011-2015 Chrysler 300 High&Low Beam,360 Degree, 500% Super Bright 7000LM/set, 6000K Cool White Plug and Play, Pack of 2

Note:

Our LED bulbs only replace halogen or LED headlamps. Can not replace the HID headlamps. Please double check before order. All our products are manufactured under the strictest quality control. If the project is not functioning properly, please contact us by email first. If you have any questions, please contact us in time.

Bulbs Specifics:

Voltage: 12v
Power: 60W * 2
Lumen value: 7000LM/Bulb
Color temperature (color): 6000K
Waterproof grade: IP68
Life:  ≥50000hrs
Fan: double ball bearing fan
Light source: CSP chips
Material: 6063 aviation aluminum

LED headlight advantages:

1.LED lamps are more energy and power than conventional halogen lamps.
2.The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
3.Instantly start without strong current impact, improve battery life by more than 30%.
4.Fast cooling , using the most advanced, heat-dissipating structural design.
5.The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
6.Low heating temperature, The working temperature of helium can reach 800°-1000°.

Install Caution

1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crush.

Package Included

2pcs led headlight high/low beam bulbs

Notice:

Please note that some vehicles may require a set of Canbus adapters to be installed.To confirm if need a DECODER or not, just remove the original headlight bulb and check if the dashboard shows BULB ERROR or not. If your headlights share the same bulb with DRL, there may be a flickering issue, please also try to install CANBUS adapters.