ER308L - TIG Stainless Steel Welding Rod - 36" x 3/16" (5 LB)

For welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308 L as well as stabilized grades 321 and 347. The maximum carbon content of less than 0.03% preserves the intergranular corrosion resistant properties of the weld deposit and weld zone, yielding x-ray quality weldsCommon applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern; suitable for cryogenic applicationsRecommended TIG Welding Parameters - DCEN (DC-) - Recommended Tungsten use 2% Thoriated, 2% Ceriated, 2% or 1.5% Lanthanated or Rare Earth - Shielding gas use 100% Argon or Argon/Helium for greater penetration and higher speeds***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***Available diameters: 0.045", 1/16", 3/32", 1/8", 5/32" and 3/16". Available Packages: 1 Lb, 2 Lb, 5 Lb, 10 Lb and 11Lb. Select your choice from the size menu options.