Auto Glass Polishing Kit Scratch Restoration Repair Tool 8 OZ Burnishing Powder

34x Car Windshield Deep Scratch Remover Cerium Oxide Powder Glass Polishing Kit

Deep Scratch Remover Glass Polishing Kit

Color:As the picture shown
Cerium Oxide Powder Capacity:8 Oz(230 g)
Felt Polishing Wheel Diameter: 2 cm/3 cm
Felt Polishing Pad Diameter: 50 mm/2"
Felt Polishing Disc Diameter: 50 mm/2"
Drill Adapter Diameter: 6 mm/0.24"
Sandpaper Grit:80/320/1000/3000/7000
Pad Max RPM：12000

Features:
1.Cerium Oxide is the best polishing powder to glass scrach because the chemical and physical reaction.
2.Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore lightly scratched windows, mirrors, tabletops,windshields,glass tables, shower screens, windscreens, fish tanks, even car headlights to like-new condition.

Suggested Instructions for Use of Cerium Oxide:
(1)Supplies Needed:
1.Cerium Oxide
2.Water (Some recommend distilled water)
3.Polishing Wheel
4.Electric Drill
5.Small Plastic Tubs (Pint or quart size)
6.Spray Bottle

(2)Directions:
1.Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass, as this may result in additional scratches once you start buffing.
2.Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.
3.Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.
4.Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).
5.Attach the dampened polishing wheel to your electric drill and dip it into the slurry.
6.Place the polishing wheel on your work area, use small size felt wheel if scrach is near corner of windows ; keep the wheel moving in an up and down and circular motion. Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack. If your slurry is becoming dry, you can spritz it with a spray bottle full of water.

Package Included:
1 x 230 g Cerium Oxide Powder
1 x 2 cm Felt Polishing Wheel
1 x 3 cm Felt Polishing Wheel
2 x Polishing Disc With 6 mm Drill Adapter
4 x 2" Diameter Wool Polishing Pad
25 x Sandpaper(5 Pieces/Each Grit)

Notes:
1.Manual measuring, please allow 1 ~ 3 mm error,thank you.
2.Please note it is for light hair line scratches, surface marks, water only.
3.Working with Cerium Oxide can be messy! When buffing, there will be splatter. You may want to have to have supplies available to cover any area you don't want to have to clean later.


Warning！！ Many other China seller give you inferior plishing powder (light red or white color, very cheap cost 2 USD/Kg, low grade and half density ), it will waste your time and damage your glass. I use only dark red color powder ( high grade ,high density and expensive cost at 10 USD/Kg ). My powder particle size is average 3 microns with high concentration of rare earth oxides to provide the best polishing.