Digital Force Tool 2-500N,Force Gauge,Kg,Ib,Oz,Force Meter Pressure Gauge Spring Dynamometer Pulled Gage Tensile Testing Tester Portable Tension Pressure

Sensor structure :Inner sensor

Accuracy:±1%

Power : 2 AAA batteries 1.5V(NOt include)

Working temperature :5-35

Transport temperature :-10-60

Relative humidity :15%-80%RH

Working conditions :No vibration source around and no corrosive environment.

Dimensions :124*60*31(mm)

Net weight :400g

Force Real-time Mode

In this mode, the displayed measured value will change along with the load.

Force First Peak Mode

Press the "PEAK" key, and the words "P" and "T" are displayed on the screen at the same time is the first peak mode.

In this mode, the instrument only displays the first peak value measured in a period of time, and the measured value will not be displayed again.

Force Peak Mode

Press the "PEAK" key, and the word "P" displayed on the screen is the peak mode. In this mode, the displayed measurement value is the maximum value. (When measuring again, if the measured value is lower than the previous maximum value, the displayed measured value will not change;

if the measured value is higher than the previous maximum value, the displayed measured value will update and change.)

2N - 500N Force Gauge

1 .High precision and high resolution;

2 .N(Newton),Kg (Kilogram) , Lb (Pound) and Oz(Ounce) four units for selection and conversion.

3 .Setting function of gravity acceleration----

4 .Upper and lower limits can be set for statistic analysis. The buzzer will alarm if exceeding the limits.

5 .Automatic shutdown function: The automatic shutdown time can be set, and the automatic shutdown can achieve a point saving effect when there is no operation for a long time.

6 .Automatic backlight, buzzer alarm function