Heat Fab 9493S Saf-T Vent EZ Seal - 4\" Horizontal Wall Thimble Square Face

 

To use this thimble, the vent must be uninsulated for a minimum distance prior to passing through a combustible wall. A minimum distance of 18 inches is required for appliance flue gas temperatures up to 400° F. A minimum distance of 6 feet is required for appliance flue gas temperatures of 400 - 480° F. The opening must be 6-1/2 inches in diameter for both 3 or 4 inch diameter Saf-T Vent systems. The wall thimble is designed to adapt to any wall thickness from 3.5” to 6” thick. If the wall is thicker than 6”, the thimble may be extended using a piece of 6” diameter snaplock or welded-seam galvanized pipe. The vent system may be terminated using any terminal Listed for use with the appliance. The wall thimble may be painted to match the decor.

• Horizontal Wall Thimble
• Square Face
• 4” Diameter
• AL29-4C Stainless Steel
• Saf-T Vent Systems

	EZ Seal Catalog & Dimensional Data
	EZ Seal Brochure
	Heatfab Weight Per Foot
	View Adapter Chart
	EZ Seal Install (3" to 5")
	EZ Seal Install (6" to 16")