JMS Universal PowerMAX V2 Fuel Pump Voltage Booster Single Output P2000GMP2

JMS Universal PowerMAX V2 Fuel Pump Voltage Booster Single Output P2000GMP2

• Adjust the voltage ramp in/out time to eliminate fuel pressure spikes
• Available in single or dual input/output versions
• Four models available for complete coverage
• LED indicator to visually monitor the status of your PowerMAX Boost-A device
• Enables 0-5V or optional internal boost
• Compatible with all vehicles, including domestics and imports
• Works with all 12V or 16V battery systems
• Plug & play versions for easy installation
• Simple installation process
• Simple Installation:
• Choose the plug & play version or splice into your existing fuel pump, ignition system, intercooler pump, or cooling fan using the included installation kit
• Case / Enclosure:
• Adjust the output voltage via the knobs on the front panel
• Use dip switches to save the voltage setting
• Optional remote-mounted voltage control knob for adjustments from the driver's seat
• Adjustment range: 14.5V
• Output model specific: 100% = 18V, 22V, 25V, or 31V
• Status LED:
• Green LED glows continuously when the unit has power
• Green LED flashes slowly when boosting the output voltage
• Green LED flashes quickly while adjusting the output voltage via the front panel
• Green LED twinkles after saving the front panel voltage values
• Adjustable Voltage Ramp-In / Ramp Out Model Specific:
• Three different methods to ramp-in and ramp-out boosted voltage
• Ramp-in boosted voltage over time (ground or 0-5V trigger)
• Externally adjustable via dip switch settings
• Time settings: 0, 0.25, 0.50, and 0.75 seconds
• Ramp-in boosted voltage based on the 0-5V voltage trigger
• Range settings: 0V, 0.5V, 1.0V, and 1.5V
• Use the optional internal boost sensor to ramp in boosted voltage based on manifold boost pressure (psi)
• Range settings: 0V, 4psi, 8psi, and 12psi
• Installation Kit Included:
• Enable wire harness, adapter fitting (1/8th NPT to barb)
• Hobbs switch preset at 5psi (user adjustable 3-7psi)
• Solder heat shrink ring terminals, heat shrink wire splices, tie straps
• Self-tapping screws, vacuum line, 1/4" to 3/16" vacuum tee
• 3/16" vacuum tee, 3/16" to 3/8" vacuum tee, and 30 amp mini-fuse
• Note: The installation kit is specific to each PowerMAX model
• Brand: JMS
• UPC: 021201230218
• Fits 2014-2020 Chevrolet Corvette
• Fits 2016-2020 Chevrolet Camaro
• Fits 2017-2019 Cadillac CTS