13pcs Paintless Dent Repair Kit, TSV Car Body Bridge Dent Puller Kit, Auto Body Repairing Remover Tool Kit for Auto Body Dents, Door Dings, Refrigerator Washing Machine Dents Repair

TSV Paintless dent repair kit using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficiency, and labor. Auto body repair tool has widely used, and suitable for any auto dents, repair door dings, hail damage, and other dents, also have efficient action on an automobile, refrigerators, washing machines, and other metal surface dents.

Note: This paintless dent repair kit does not include glue guns and glue sticks. Also, it is effective on thin metal surfaces and is not suitable for metal surfaces exceeding 1mm.

How To Use:
1. Clean dent surface.
2. Put the glue sticks to the gun and heat, connect the power source and preheat for 5-10 minutes.
3. According to the dent size choose the glue puller tab, then put the heated glue on the puller tab, immediately place the puller tab in the center of the dent and hold on until it sticks.
4. Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
5. After the glue cooling, use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappears.
6. After finishing the dent, use alcohol or hot water to clean the glue on the car and the puller tabs.