22.5" Truck Tire Changer Pneumatic Portable Tire Changing Machine Pneumatic Tire Remover Tool

Product Overview:
Tire removal machine is a professional tire removal and installation machine, it can easily remove the bad tire, repair the tire or replace the tire. The use of tire removal machine can greatly reduce labor consumption, improve work efficiency, is an essential tool in the process of tire maintenance.

Product Parameter:
1. Working Power: Pneumatic
2. Working pressure: 0.8-1.2 Mpa
3. Rotating speed: 1 rpm/ 12 sec
4. Application Hub: Standard R22.5 inch series
5. Net weight: 165LBS (75kg)

Use warning:
1. Before removing the tire and installing the tire, the grease must be evenly applied on the tire mouth, otherwise it will easily hurt the tire mouth.
2. Before tying the tire, use a shovel to shovel the tire mouth, and squeeze the tire rod as flat as possible, so that the shovel head and the steel ring have a gap of 0.5 cm. Damage the device.
3. The machine should not be exposed to rain to avoid damage.
4. The air compressor should be drained regularly to prevent a large amount of water from flowing into the motor and causing damage to the machine.

Maintenance methods:
1. After using it a few times, be sure to check the tightening of each fixing screw. Each screw must be re-tightened. Regular inspections are required in the future to prevent the screws from loosening and damaging the device.
2. The tire picking device and tire mounting device should be smeared by the police to prevent rust.
3. Regularly fill with wind gun oil.
4. Maintenance of the machine head: after removing the inner connecting shaft, add grease into it and turn the machine to lubricate the gears.

Item Included: 239895
R22.5" Pneumatic Vacuum Tyre Dismounting and Assembling Machine with Top Tyre Cylinder