LOCTITE 262 Threadlocker for Automotive: High-Strength, Oil Tolerant, High-Temp, Anaerobic, Permanent, Works on all Metals | Red, 6 ml Tube (PN: 37420 - 487231)

LOCTITE 262 Threadlocker for Automotive: High-Strength, Oil Tolerant, High-Temp, Anaerobic, Permanent, Works on all Metals | Red, 6 ml Tube (PN: 37420 - 487231) LOCTITE Threadlocker 262 is a permanent, high-strength, red threadlocker that is applied to fasteners up to 3/4" (19mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. LOCTITE 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. Perfect for temperatures between -65°F - 300°F (-54°C - 149°C). LOCTITE 262 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. TYPICAL APPLICATIONS include the locking and sealing of large bolts and studs (up to M25 ). The thixotropic nature of LOCTITE 262 reduces the migration of liquid product after application to the substrate. MILITARY GRADE ADHESION This high-strength thread locker is tested to the lot requirements of Military Specification Mil-S-46163A. MIL-SPEC (Military standard or Military-SPEC) adhesive are products that meet or exceed the US defense standard, a measure of quality set to standardize the expectations of all products supplied to the US Military. Each lot is also tested by the ASTM (American Society for Testing and Materials), a body of skilled personnel that specializes in testing materials and generating standards of quality. Finally, LOCTITE 262 is approved by the NSF (National Science Foundation), an independent US governmental agency that supports research and education in science and engineering. LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Engines of nearly every professional race car are assembled and maintained with LOCTITE brand adhesives, sealants, gasket makers, and coatings. Whether gasoline or diesel, from bolts and gaskets to cooling lines and core plugs, Henkel products are used to seal, secure, and repair vehicle components. • OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals. • RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) with improved oil tolerance. • REMOVABLE WITH HEAT. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. • MULTI-PURPOSE APPLICATIONS. Assembly with air tools, cylinder block bolts, ring gear bolts, and transmission shaft bolts. Ideal for fasteners up to ¾" (19 mm) in size before assembly. • CONVENIENT CURING. Sets in just 5 minutes & is fully cured in 24 hours. Brand: Loctite MPN: ‎487231