Leaf Spring Spacer Kit for Model A Style Cross Member

By stacking a few of these together, you can adjust the height of the rear of your Model A/T-style rear suspension. These are currently 1/4-inch thick. If they were a little thicker, you wouldn't have to stack as many to make a difference. I doubt someone would go to the effort of installing only one of these for only 1/4-inch difference, so using a wider stock shouldn't hinder anyone. The length and width of these are great for fitting up into the spring pocket/mount completely without bottoming out on the sides and the medium rise ""T-style"" spring that Speedway sells works well but may get close to the frame on the ends once the suspnsion settles. That's why I needed to use a few of these. Now, my frame has just a slight rake and doesn't bottom out. I mounted the spring perches on top of the axle. FYI.