Leviton Indoor Load Centers are easy to install and feature a white enclosure for a modern, appealing unit. All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired at rough-in without circuit breakers installed. Leaving the option of having the circuit breakers easily plugged-on at final installation. An optional observation window in the cover allows at-a-glance operating status of all the circuit breakers (sold separately).All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired at rough-in without circuit breakers installedGalvanized steel, white powder coat enclosure housing for a clean, neat appearance, (cover and door sold separately)Easily invertible for bottom feed applicationsCopper bus is a standard feature on all Leviton load centersNotches stamped into the enclosure for cable ties promote secure and neat wiring, ample room for hands to move and work freelySingle phase, 3-wire, 120/240 VAC, 22kA short-circuit rating
These products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. www.p65warnings.ca.gov
WARNING: 