Key Features:
- The ultimate companion for an entry-level maker learning electronics
- Contains LEDs, Passive, Transistors and Switches
- Comes in a convenient plastic storage box with a latch!
LEDs and passives and transistors and switches and op-amps oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.
Kit Contents:
1 - Storage box with latch
1 - Half-size breadboard
20 - Male/male jumper wires - 3" (75mm)
10 - Male/male jumper wires - 6" (150mm)
5 - 5mm Diffused green LEDs
5 - 5mm Diffused red LEDs
1 - 10mm Diffused Common-Anode RGB LED
10 - 1.0uF Ceramic capacitors
10 - 0.1uF Ceramic capacitors
10 - 0.01uF Ceramic capacitors
5 - 10uF 50V Electrolytic capacitors
5 - 100uF 16V Electrolytic capacitors
10 - 560 ohm 5% axial resistors
10 - 1K ohm 5% axial resistors
10 - 10K ohm 5% axial resistors
10 - 47K ohm 5% axial resistors
5 - 1N4001 Diodes
5 - 1N4148 Signal Diodes
5 - NPN Transistor PN2222 TO-92
5 - PNP Transistor PN2907 TO-92
2 - 5V 1.5A Linear voltage regulator - 7805 TO-220
1 - 3.3V 800mA Linear voltage regulator - LD1117-3.3 TO-220
1 - TLC555 wide-voltage range, low-power 555 Timer
1 - LM358 Dual operational Amplifier
1 - Photocell
1 - Thermistor (Breadboard version)
1 - Vibration sensor switch
1 - 10K Breadboard trim potentiometer
1 - 1K Breadboard trim potentiometer
1 - Piezo buzzer
5 - 6mm Tactile switches
3 - SPDT slide switches
1 - 40-pin Break-away male header strip
1 - 40-pin female header strip
