Juki HZL-F400 Exceed Quilt Pro Computerized Sewing & Quilting Machine

Frequently used stitch patterns can be selected directly through the direct select mode. Piecing, applique, blanket stitch for applique, overlocking, invisible hemming, stretch stitch and more all at the touch of a button. Stitch settings, patterns and recommendations for the best presser foot can all be seen on the machine’s LCD screen display. The keypad allows you to quickly and easily select lettering and to adjust settings. Stitch can be adjusted with just the turn of a dial! Combine decorative stitches and lettering into new sequences. You can save up to 70 patterns! You can program the needle up/down position, automatic thread trimming, and foot control trimming with just the push of a button. Also set the contrast of the LCD screen, change the volume of the machine buzzer, select from 8 different language settings, and use the on-board sewing guide when you need a little help. Thick fabrics can be sewn with ease. Leather, denim, and canvas are no problem for this machine. No fabric shrinkage even while sewing on extra lightweight materials. Using a unique sensor method, HZL-F series sews beautiful buttonholes regardless of the type of material and overlapped sections. 16 types of buttonholes are available for your needs. Now it is possible to adjust the cutting width of the buttonholes in 3 steps. HZL-F series trims both needle and bobbin threads automatically by pressing the heel side of the foot controller. It is also possible to trim threads with a button located at machine body. With this feature you can concentrate on your project while automatically cutting the thread! Presser foot can be raised and lowered by the knee-lifting lever. The presser foot lift is up to 12 mm when the lever is used. The F400 now has a feature that allows you to move the position of a complete pattern without changing the width, as well as variable needle positions that allow you to place the needle any where you want.