Window Film One Way Mirror Tint HOME TINTING Privacy Solar Reject Glare UV Block 19" W

Features
HEAT INSULATION AND ENERGY SAVING - Blocking out 85% of infrared rays, glass decorative stickers can retain heat in winter and keep it out in summer, helping reduce expensive heating and cooling costs,energy saving. 10% of VLT meaning effectively reduce glare

EFFECTIVE UV REJECTION - UV solvents added at the bottom, home window tint film effectively blocks out 97% of UV rays, prevent and reduces fading and aging of interior furnishings

STATIC CLING AND NON ADHESIVES - Glue free design, no chemical release, very easy to install, reduce window installation cost, just make sure window surface is completely clean and absolutely free of any blemishes, remember to use A LOT of soap/water mixture to soak both the adhesive side and window

THICK AND HIGH QUALITY - The house window mirror tint has excellent thermal insulation effect, with anti-scratch layer on the surface, friction resisting, won’t fade nor blister, easy to remove, economical and practical

PRIVACY PROTECTION – Glass privacy film like a privacy curtain, provides great intended privacy during daytime Only; the privacy-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the reflective privacy appearance

Feature:

Windows bring sunlight in but also cause cooling cost,a good house companion for you. WochiTV adhesive Window Films can reduce energy loss and lower cooling costs by up to 30 percent. Also it can block annoying glare and reject UV to reduce fading and protect interior furnishings.

1.Widely application - A suitable window tint film, effectively reduce glare, widely used in dining room, kitchen, residential, bedroom, office and etc.

2.No glue - This removable heating block window film is made from earth friendly PVC, clear and bright, no need glue when applying, easy adhesive film bring you a lot of convenience.

3.Easy to use - DIY window tint film, applicable to any smooth or flat glass surface, like window, sliding door, balcony, protecting the glass from damage.

Install Steps
1.Measure the size your need
2. Trim privacy film to required size
3. Keep window or glass clean
4. Wet the window with soapy water
5. Remove the backing protective sheet, and wet the solar film
6. Set up one way glass film on window
7. Cover the backing film on the solar film before squeegee away water and air bubbles
8. Peel off the backing film
9. Cut off the excess edges

Tips:
1, Always put the film on the inside of window and only apply it to smooth glass surfaces.
2, Affix tape on a corner of the back side to quickly remove the clear backing.
3, For best results, do not apply film in direct sunlight or during freezing weather.
4, For light leakage at edges of some old windows, use black electrical tape or silicone caulk or similar things to seal the edges.
5, Please remember to take caution when handling the film as the slightest fold will create a permanent wrinkle.

Note
Please measure the size you need before purchasing.
This is a one-way mirror film. Itself is transparent, privacy effect is by the
strength of contrast of light to decide.
Please allow a little size error due to manual measurement.
Due to the light and screen difference, the item's color may be slightly different from the pictures.
Please check your order immediately after receiving it.
We cannot and will not replace, or refund your order once you have cut or used the material.