Hero image 0 of Iron on High Visibility Reflective Heat Transfer Film Tape (4" x 25 yds), 0 of 4

Iron on High Visibility Reflective Heat Transfer Film Tape (4" x 25 yds)

Size:4" x 25 yds

Actual Color:Gray

Key item features

MATERIAL & CONSTRUCTION: • Type: Iron on / Heat Transfer (this product is intended only to heat transfer on fabric or similar surfaces. This may not sew on or stick to any products) • Backing Material: PET film with hot melt adhesive • Retroreflective daytime fabric color - Silver • Weight: 6 – 7 oz
DESIGN & SIZING • Recommended for Medium to heavy Weight Fabrics, such as high-quality safety vest or jackets. • Machine washable, shrink resistant, wrinkle resistant, quick drying, durable colors. • Retroreflective sizing options o 1” width Silver – 2.54 cm wide retroreflective material o 2” width Silver – 5.08 cm wide retroreflective material o 4” width Silver – 10.16 cm wide retroreflective material
COMPLIANCE • ANSI / ISEA 107-2015 – American Standard on High Visibility Safety Apparel • CSA Z96 – Canadian Standard on High Visibility Safety Apparel • Other Certifications – EN 20471 • Home Wash Cycles: > 50 cycles @60℃（140℉） • Reflective coefficient: >420
WASH / CARE INSTRUCTIONS. • Machine washable • Shrink resistant • Wrinkle resistant, • Quick drying, • Durable colors
APPLICATION INSTRUCTIONS • Things needed: An ironing mat or a similar material (example towel), a nice solid table, your project (example T-shirt) and the heat transfer vinyl tape • Application o Flip your image o Cut and weed - The goal when cutting heat transfer vinyl is to not cut through the clear carrier sheet (shiny side). This plastic sheet acts like transfer tape, keeping your design tacked down to your fabric while pressing. It also protects the fabric from the direct heat of the press or iron. o Pre-Press Your Fabric - Get that fabric nice and warm before attempting to apply the vinyl. Heating up the fabric opens up the fibers, allowing the adhesive from the vinyl to really absorb into the material during the press. So go ahead and press your fabric for 2-3 seconds with your iron/heat press o Temperature + Pressure + Time -  Not all vinyl has the same heat setting, and it is crucial to your success to follow your manufacturer's heat setting recommendations. Typically, a cotton-blend setting with temperatures in 350-375 deg F range will work for most applications.  The next part of the HTV application equation is pressure. If using an iron, you need to really put your weight on the iron while you're pressing. Make sure your pressing surface is hard and can handle having you press with all your might on it.  Finally, make sure you know the ideal pressing time. 10-15 seconds is the typical pressing time. You don't want to scorch the adhesive by keeping the heat on too long and over pressing. o Know when to peel - Changes slightly by the type of application and tape. o If not sure, ALWAYS check out YouTube instructional videos and do a tryout on a small sample.

Specs

Paper size
4" x 25 yds
Transfer paper type
Heat Transfers
Fabric color
Silver
Form
Roll
Roll length
25 yds
Brand
Just In Trend

Current price is Now $36.72

You save $6.17

was $42.89

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives by Tue, May 12

Sold and shipped by Just In Trend LLC

4.4449339207048455 stars out of 5, based on 227 seller reviews(4.4)

Report an issue with this seller

Free 30-day returns

About this item

Product details

MATERIAL & CONSTRUCTION: Type: Iron on / Heat Transfer (this product is intended only to heat transfer on fabric or similar surfaces. This may not sew on or stick to any products) Backing Material: PET film with hot melt adhesive Retroreflective daytime fabric color - Silver Weight: 6 – 7 oz

MATERIAL & CONSTRUCTION: • Type: Iron on / Heat Transfer (this product is intended only to heat transfer on fabric or similar surfaces. This may not sew on or stick to any products) • Backing Material: PET film with hot melt adhesive • Retroreflective daytime fabric color - Silver • Weight: 6 – 7 oz
DESIGN & SIZING • Recommended for Medium to heavy Weight Fabrics, such as high-quality safety vest or jackets. • Machine washable, shrink resistant, wrinkle resistant, quick drying, durable colors. • Retroreflective sizing options o 1” width Silver – 2.54 cm wide retroreflective material o 2” width Silver – 5.08 cm wide retroreflective material o 4” width Silver – 10.16 cm wide retroreflective material
COMPLIANCE • ANSI / ISEA 107-2015 – American Standard on High Visibility Safety Apparel • CSA Z96 – Canadian Standard on High Visibility Safety Apparel • Other Certifications – EN 20471 • Home Wash Cycles: > 50 cycles @60℃（140℉） • Reflective coefficient: >420
WASH / CARE INSTRUCTIONS. • Machine washable • Shrink resistant • Wrinkle resistant, • Quick drying, • Durable colors
APPLICATION INSTRUCTIONS • Things needed: An ironing mat or a similar material (example towel), a nice solid table, your project (example T-shirt) and the heat transfer vinyl tape • Application o Flip your image o Cut and weed - The goal when cutting heat transfer vinyl is to not cut through the clear carrier sheet (shiny side). This plastic sheet acts like transfer tape, keeping your design tacked down to your fabric while pressing. It also protects the fabric from the direct heat of the press or iron. o Pre-Press Your Fabric - Get that fabric nice and warm before attempting to apply the vinyl. Heating up the fabric opens up the fibers, allowing the adhesive from the vinyl to really absorb into the material during the press. So go ahead and press your fabric for 2-3 seconds with your iron/heat press o Temperature + Pressure + Time -  Not all vinyl has the same heat setting, and it is crucial to your success to follow your manufacturer's heat setting recommendations. Typically, a cotton-blend setting with temperatures in 350-375 deg F range will work for most applications.  The next part of the HTV application equation is pressure. If using an iron, you need to really put your weight on the iron while you're pressing. Make sure your pressing surface is hard and can handle having you press with all your might on it.  Finally, make sure you know the ideal pressing time. 10-15 seconds is the typical pressing time. You don't want to scorch the adhesive by keeping the heat on too long and over pressing. o Know when to peel - Changes slightly by the type of application and tape. o If not sure, ALWAYS check out YouTube instructional videos and do a tryout on a small sample.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Paper size

4" x 25 yds

Transfer paper type

Heat Transfers

Fabric color

Silver

Form

Roll

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.