

2x H11 H8 LED Fog Light Bulbs Conversion Kit Lamp 100W 6000K HID Xenon White
Key item features
- How to choose the correct size?1. To confirm the size in your original user manual or by checking the original bulb's back.
2. To search in web with “automotive bulb look-up “and find out the bulb size.
3. Contact customer service to check the vehicle model. - Plug&Play Quick Installation.Built with smaller size than the common LEDs in the market without building an external driver, directly plug into the factory housing.
- Neither side lighting up? Both sides flicker, flash, or work inconsistently.
Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
- One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again.
2)please exchange the bulbs from side to side and see if the problem could solve.
3)Please check your connection and fuse.
4)If still could not help, please contact our customer service, we will get back to you within 48 working hours.
Specs
- Manufacturer part numberSYJIIP-200501-H11-US
- BrandCHUSYYRAY
- Free shipping
Free 30-day returns
How do you want your item?
About this item
Product details
Notes:
Please check whether it is fit your vehicle before purchase.
This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your vehicle,Thank you!)
Compatible With: H11/H8/H9/H11B
Specifications:
Light source: 3570
Number of lights: 2 SMD
Voltage: DC8~30V ( Fit 12V 24V Vehicle )
Power: 100W/pair
Lumen: 8000LM/pair
Light Color Temperature: 6000K White
Blub Color: black
Material: Heatsink aluminum shell
Light angle: 360°
Fanless: yes, no noise
Waterproof Rate: IP67
Heat dissipation principle: aviation aluminum body self-heating
Working temperature: -40°~+90°
Working life: ≥50000h
Product selling point:
One-piece compact size, non-destructive installation, plug and play, 0 second startup;
360° non-dead-angle lighting, high-brightness automotive LED headlights: powerful heat dissipation, instantaneous brightness, support stroboscopic
High-brightness lighting: Compared with traditional halogen lighting, it has 300% brightness commission, and the penetration distance is increased by 100 meters
0.01S high-brightness quick start: traditional xenon lamps are affected by physical factors, and the brightness of the car lights is gradually increased.
Using copper-based thermoelectric separation is more efficient and safer
LED headlight advantages:
1. LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
2. Fast cooling, using the most advanced, heat-dissipating structural design.
Low warranty:
The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 8%.
3. Low heating temperature, The working temperature of helium can reach 800°C-1000°C
4. LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
5. Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Package Content:
2x H11 High Power LED High/Low Beam Fog Light Bulbs
Comes with Retail Box
- How to choose the correct size?1. To confirm the size in your original user manual or by checking the original bulb's back.
2. To search in web with “automotive bulb look-up “and find out the bulb size.
3. Contact customer service to check the vehicle model. - Plug&Play Quick Installation.Built with smaller size than the common LEDs in the market without building an external driver, directly plug into the factory housing.
- Neither side lighting up? Both sides flicker, flash, or work inconsistently.
Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
- One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again.
2)please exchange the bulbs from side to side and see if the problem could solve.
3)Please check your connection and fuse.
4)If still could not help, please contact our customer service, we will get back to you within 48 working hours.
