Rockville VOL70100 White 100 Watt 70v Wall Volume Control Zone Controller Box

Description:

The VOL70100 by Rockville is a 70 volt 100 watt wall volume controller. Our volume controllers are some of the best on the market. These are for constant voltage systems such as 70 volt or 100 volt. The reliability and accuracy is what makes a big difference. Our 11 step controller is precise and accurate.

This model supports any zone with 100 watts or less going to it. The euro-block connectors make installation easily. The terminals are fully detachable. We use a beautifully designed plate that will fit in with your standard décor. These are a standard 1-gang size for easy installation. Internally the circuit board is protected from dust build up to ensure long life.

What is a 70 volt volume controller ?

If you have a 70 volt amplifier that is one zone only you can use these to split that amp into multiple zones. You can wire the output of the amplifier to the zone controller and the zone controller is wired to the speakers within the zone. All wiring is done in parallel (+ to + and – to -).

If you already have a multi zone 70V amplifier then you can go out from any zone and into this controller and then out form the controller into the speakers (each speaker is wired from one to the next in parallel). The end result is that you can access the volume control from that room without having to change the volume from the amplifier itself.

What is 70 volt ?

70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 150 watts and you can install speakers that total around 120 watts. It does not matter if it is 12 speakers that are 10 watts each or 24 speakers that are tapped at 5 watts each. You always want your 70 volt amp to have at least 15 to 20% more power than the combined watts your speakers are tapped at.

When we say the word tap, we are referring to the switch that is located on the rear of these speakers where you can select how many watts you want the speaker to play. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 6 watts, and the hallway or bathroom speakers at 3 watts.

Features:

Rockville VOL70100 100 Watt 70 Volt Wall Volume Control Zone Controller Box 1-Gang
16-24 AWG wire inputs
Rugged ABS Frame
Power Rating: 100W (works with 100 Watts and under)
Total Attenuation: 30dB
Dimensions: 4.5”(H) x 2.75”(W) x 2.88”(D) (including the knob)
Item Weight: 0.77 Lbs
Rotating volume control with 11 step attenuation with absolute off
70, 100 volt operation (also works with lower constant voltage systems)
Detachable Euro-block terminal connector allows you to quickly and easily connect speaker wire
White single gang plate fits standard single gang electrical boxes
Attractive design will fit in well with your standard decor
White Plastic Plates with Matching Same Color Knobs
Dependable performance with protection from dust (internal board is protected with special tape)
Excellent frequency response so you do not get any signal deterioration
Mounting screws are included
It is recommended that this volume control be mounted in a "backless" junction box so it gets adequate ventilation
If an enclosed box is to be used, we recommend a deep box (3.5 inches in depth)
Premium-quality volume control
Color: White<