Pro Tapes PRO-46 Colored Masking Tape is a rubber-based colored crepe paper tape which is used in many applications. Pro 46 is used as a printed or unprinted general purpose tape on a variety of smooth surfaces. The tape is flexible and resists water, solvents, and oils. Pro Tapes PRO-46 is versatile and serves many uses including as a framer tape to hinge prints onto matboard. Made in the U.S.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information - Core: 3 inch diameter
- Backing/Carrier: crepe paper
- Adhesive: rubber-based
- Standards Met: ASTM D6123/D6123M-07, Type II. Conforms to ASTM D-4236
- Thickness: 4.7 mils (carrier, adhesive)
- Adhesion: 33 ounces per inch (to stainless steel test panel)
- Tensile Strength: 18 pounds per inch (longitudinal)
- Service/Operating Temperature: 50F to 150F
- Elongation: 8 %
