DESCRIPTIONThe LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) based synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free.LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the LUBRIPLATE Oil Analysis Program. APPLICATIONSThe LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. Always consult LUBRIPLATE before changing to an SFGO fluid from an existing lubricant that may not be compatible with polyalphaolefin based oils. ADVANTAGESExcellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extendedequipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points whichensure optimum performance over a wide operatingtemperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals,plastics, paint and mineral oils. TYPICAL TEST DATAPROPERTY TEST METHOD TYPICAL RESULTS* SFGO SFGO SFGO SFGO SFGO SFGO Ultra 7 Ultra 15 Ultra 22 Ultra 32 Ultra 46 Ultra 68 Viscosity SUS @ 100°F ASTM D-2161 5189106160220325Viscosity SUS @ 210°F ASTM D-2161 343941465259Viscosity cSt @ 40°C ASTM D-445 71620305067Viscosity cSt @ 100°C ASTM D-445 2446810Viscosity Index ASTM D-2270 104122128135134141Pour Point ASTM D-97 -67°F/-55°C -65°F/-54°C -63°F/-53°C -58°F/-50°C -45°F/-43°C -45°F/-43°C Flash Point ASTM D-92 305°F/152°C 405°F/207°C 405°F/207°C 475°F/246°C 480°F/249°C 495°F/257°C Fire Point ASTM D-92 400°F/204°C 435°F/224°C 430°F/221°C 515°F/268°C 520°F/271°C 530°F/277°C API Gravity ASTM D-287 41.83941.137.935.134.1Color ASTM D-1500 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 4-Ball Wear Test ASTM D-2266 0.40 mm 0.40 mm 0.40 mm 0.48 mm 0.41 mm 0.36 mm SAE Grade 5W 5W 5W 102030ISO Viscosity Grade ASTM D-2422 71522324668Demulsibility Characteristics ASTM D-2711 Procedure B; Run 1: Percent of Water in Oil *** *** *** 0.10%0.10%0.30%Free Water Volume *** *** *** 85.5 ml 85.5 ml 86.8 ml Emulsion Volume *** *** *** 0.0 ml 0.0 ml 0.0 ml Demulsibility Characteristics ASTM D-2711 Procedure B; Run 2: Percent of Water in Oil *** *** *** 0.10%0.10%0.40%Free Water Volume *** *** *** 86.5 ml 86.5 ml 86.0 ml Emulsion Volume *** *** *** 0.0 ml 0.0 ml 0.0 ml Demulsibility Characteristics ASTM D-2711 Procedure B; Average: Percent of Water in Oil *** *** *** 0.10%0.10%0.40%Free Water Volume *** *** *** 86.0 ml 86.0 ml 86.4 ml Emulsion Volume *** *** *** 0.0 ml 0.0 ml 0.0 ml
