Veneer Stone Mold VS 502/5. Concrete Stone Mold. 2 in 1 Flat and Corner Mold

VS 502/5: 6 section urethane rubber mold designed for casting plaster, concrete and polymer concrete. Veneer stone casted from 502/5 mold can be installed in corners or flat wall surface. Mold size 3.12 SQ.FT (0.29 m2). approximate. Measurements - 27” X 20 3/4” X 1 1/2” (68.50 cm X 53 cm X 4cm) Mold's Sections— 6 Section dimensions: Approx. size of 3 Sections 6” X 8 3/4” X 1" (15 cm X 22 cm X 2.5 cm) & 3 sections 6" x 16 1/4" x 1" (15 cm X 41 cm). Rubber molds have the abrasion resistance and tear strength needed to keep production moving. Casting concrete into rubber molds lets you make perfect copies of any original every time! Concrete Stone Molds are ready for casting same day and last in production...saving you time, labor, and material costs. Urethane molds are used everyday by professionals to make architectural elements, concrete stone veneer, formliners, concrete countertops, GFRC panels, concrete statues and furniture and the list goes on. These molds can be used over and over. These concrete stone molds are easy to use, and each purchase comes with an instruction sheet with information and tips on: mixing and pouring concrete, coloring the stone, releasing the casting. Please note: The stone making instruction will be sent to buyer's email address by request.The stone making instruction also available on GlobMarble site. We manufacture all of our own products and have an unlimited supply. If you need more, let us know, we will get right back to you with pricing. We recommend concrete Release Agent - G-1 in releasing concrete or gypsum plaster castings from rubber molds. For for plastification and water reduction of cementitious construction materials please use our Concrete Water Reducer – Super Plasticizer and other concrete additives. Concrete Mold Veneer Stone Mold VS 501/3 Concrete Wall Mould