For Jeep Wrangler 2007 2008 2009 Headlights,9008 H13 LED High/Low Beam+9006 led fog light 4pc

WARM TIP:

Before purchase led bulbs, please check the correct plug size of your car. And check the size of vehicle to ensure the light bulb has enough space for installation.

Product advantages:

ULTRA-HIGH BRIGHTNESS: led bulbs with COB LED chipset, 360-degree clear beam no blind zone. Luminous Flux: 8000lm/set (4000lm/bulb), Xenon white light reflect road paint/signs better to show clearer road situation. Operating Voltage: DC 9-24V (fit 12V,24V vehicles).

INTELLIGENT SYSTEM: This LED bulbs built-in constant current CPU, instant full brightness without start-up relay. Operating Temperature: -40-80 degree Celsius.

STRONG HEAT DISSIPATION: This led fog light bulb all-in-one heat conduction high speed mute fan system, 360-degree heat radiating;High speed mute fan(12000R/Min), high air flow for faster cooling rate, ensures maximum heat dissipation and prolongs lifespan of LED bulbs over 50000hrs.

APPLICATION: Apply to This LED Headlights/Fog light/low beam, perfect replacement for Halogen Lights. Some cars require decoder or resistors to be installed to avoid the flicker or warning.

HIGH QUALITY PRODUCT: Buy with Confidence . If you have any questions, please feel free to message.

specification:

Plug Type:9008/H13(High Beam and Low Beam)+9145(Fog light)
Voltage: 9V-36V
Power: 50W/bulb
Actual lumens: 8000 lumens/set and 4000 lumens/bulb
LED Type: Imported customized dedicated COB chip
Color temperature: 6000K cold white
Waterproof rating: IP68
Shell material: aviation aluminum
Beam angle: 360°
Working temperature: -40 ° C ~ +80 ° C
Connector type: plug and play
Service life: more than 30,000 hours of bright continuous light

Package Content:

2pcs 9008/H13 LED High Beam and Low Beam Bulbs
2pcs 9145/9005/H10 LED Fog light Bulbs

Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.