High-End 4K HDMI KVM Extender up to 100m/330ft, USB Extension with Zero Latency, Supports RS232 & IR

4KEX100-KVM-H2 is a 100m/330ft 4K@60 444 HDR HDBaseT Extender. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. It provides HDMI transmission up to 330 feet (100 meters) over category cable. It supports bi-directional Ethernet pass-through, RS-232, bi-directional IR control and Bi-direction analog audio. Built-in one-way PoH, the receiver can be powered by the transmitter. The extender features visually lossless VESA Display Stream Compression (DSC) to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. It also supports one USB host and 4 USB device ports switchable for KVM usage.

Main Features:

HDMI Input/Output supports resolutions up to 4K@60Hz 4:4:4 8 bit

Visual lossless DSC compression solution

HDCP 2.2 compliant

Supports HDR formats including HDR10 and Dolby Vision

Transmits HDBaseT signal up to 100m/330ft for 4K and 1080P via a single Cat 6/6a/7 cable

Transmits HDBaseT signal up to 90m/295ft for 4K and 100m/330ft for 1080P via a single Cat 5e cable

Bi-directional IR, RS232 pass-through over HDBaseT

Provides one USB Host and four USB Device ports for remote KVM control

Supports one-way standard PoH, one power adapter on the transmitter can power both units

Automatic EDID management

Note: The kit supports Dolby Vision only if the resolution is less than or equal to 4K@30Hz.

• 4K@60 Ultra HD Video

With HDMI 2.0 technology which supports up to 4K@60Hz (4:4:4) resolution, the extender brings ultra-high definition picture with more vivid visual effect.

• KVM Extension

The extender provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 330ft/100m. High-speed USB 2.0 up to 480Mbps passes through over HDBaseT with zero delay.

• Excellent Audio Enjoyment

The extender supports Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master, etc., so it can work perfectly with AV receiver, home cinema, speaker, amplifier, etc.

• One-Way PoH

With PoH integrated inside, the extender needs only one power supply connected to TX to power both units. Its power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

In the Box:

Transmitter x 1

Receiver x1

Power Adapter (DC 12V 3A) x 1

AC Power Cord with US Pins x 1

IR Emitter x1

Broadband IR Receiver (30 KHz ~ 50 KHz) x 1

Phoenix Male Connectors (3.5mm, 3 Pins) x 2

USB 2.0 Type-B to Type-A Cable (L=1.5m) x 1

Mounting Brackets (with Screws) x 4

User Manual x 1