Howe Racing 82870 Improved Hydraulic For Stock Clutches

Our original version of this bearing came out in 1996 and was replaced in 2007 with this improved design.  These were originally designed for racing classes that require a stock type clutch.  Installs by replacing one bolt from the front of the transmission.  Conical shims are provided to properly fit the bearing to zero clearance. 1.379" throw out bearing inner diameter. -4 AN to 1/8" NPT male inlet fitting. 2.375" throw out bearing extended diameter. Pressure exceeding 1,500 psi. can damage the o-rings.