How to use DrainX Hydro Pressure Bladders: Review all instructions carefully before using tool. Store adapter in a cool, dark, dry place. Attach the drain cleaning bladder to a garden hose connected to a cold water faucet Turn on cold water slowly to full pressure. Hold the hose attached to the drain cleaning bladder firmly in place until the drain cleaning blades expands to fit snugly against the wall of the drain pipe. Turn off cold water once bladder has fully inflated. Repeat this step until snug fit is obtained. Insert the drain cleaning bladder into the drain pipe until you reach the clog. Drain bladder MUST be inserted completely into the drain pipe a minimum of 6”. Turn on the cold water slowly to full pressure. Hold the hose attached to the drain cleaning bladder firmly in place until the drain cleaning bladder expands to fit snugly against the wall of the drain pipe. Once fully inflated, water will be forced out the end of the drain cleaning bladder to put pressure on the clog and push it through the drain pipe. Do not leave the bladder unattended while water is running. If water begins to back up, immediately shut the water off. Once the clog is cleared, turn the water off and wait until the drain cleaning bladder is fully deflated before removing from the drain pipe. Disconnect the drain cleaning bladder from the garden hose, rinse with water and dry as needed.
WARNING: 