97-01 Mitsubishi Lancer - Kontrol Pro Coilovers Fits select: 1997-2001 MITSUBISHI MIRAGE

Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your vehicle, both on the street or at the track.

PROTECTION AGAINST CORROSION - Steel shock bodies are electroplated with zinc to resist rust and protect from the elements. The shock or strut valving for each piece is matched accordingly to the spring rate, giving superior ride quality and reliability.

SUPERIOR RIDE QUALITY & RELIABILITY - The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube construction, the Monotube design dissipates heat faster and more evenly, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation issues are a lot less common in a Monotube design, which results in a more consistent ride quality.

FEATURES:

• 36-WAY ADJUSTABLE DAMPING - All Ksport coilovers offer 36 levels of damping which allow you the ability to perfectly dial in your coilover kit. Set damping to full soft for a nice comfortable cruising setting for normal driving.

• COLLARS AND UPPER MOUNTS MADE FROM 6061 ALUMINUM WITH T6 FOR INCREASED HARDNESS - Our spring perches, locking collars, top mounts and some lower mounts are made from high quality 6061 aluminum. Benefits include excellent strength and aluminum helps reduce weight.

• ADJUSTABLE SPRING PERCH FOR HEIGHT ADJUSTMENT - Some vehicles have a separate rear shock and spring. In the coilover industry we call this a “hi-low kit”. In this case you will adjust ride height via the spring. Adjustable lower mounts on the rear shock aid in setting the correct shock stroke. Vehicles with this type of set up can still go as low or lower than true coilovers.

• ADJUSTABLE LOWER MOUNT ALLOWING MAXIMUM SUSPENSION TRAVEL - Most of our coilovers feature the ability to adjust your ride height without affecting the shock and spring travel. This way you can set your desired ride height without having to worry about bottoming out the shock.

• CAMBER ADJUSTMENT ON MANY MODELS - Many of our applications that have pillowball upper mounts also have camber adjustability. This is extremely helpful when you need to dial in your camber for vehicle alignment purposes. This also eliminates the need for a separate camber kit. NOTE: Camber adjustment is not available on all models with pillowball upper mounts.

• PILLOWBALL TOP MOUNT FOR INCREASED STEERING FEEL - Many of our applications for vehicles with McPherson type suspension will have pillowball upper mounts. Our patented new bearing design helps combat noise while turning unlike many other coilovers on the market. Steering feel and response are improved with pillowball upper mounts.

• MONOTUBE HIGH PRESSURE DESIGN REDUCES OIL LEAKAGE - All our coilovers use Monotube shocks which dissipate heat better, allows finer damping adjustment and requires a more expensive design process compared to twin tube shocks.

• ELECTROPLATED BODY FOR ADDED PROTECTION FROM CORROSION AND RUST - To help prevent corrosion and rust from the elements of nature, all our coilovers are electroplated with zinc. We also include an anti-rust paste packet with our kits that can be applied to certain key areas of the coilover for added protection.

• DUST BOOT TO PROTECT DAMPER SEAL - Dust boots are standard on all coilovers. We also integrate the bump stop inside the dust boot. This is more efficient and is less likely to crumble to pieces and deteriorate like other designs.

Spring Rates(kg/mm):
Front: 7.5
Rear: 5.3

Works with: Mitsubishi Lancer/Mirage 1997-2001