Nilight 7 Inch Motorcycle LED Headlight 4.5 Inch Fog Lights Auxiliary DOT Kit Compatible with Harley Davidson Electra Street Glide Fat Boy Road King Heritage Softail CVO

Easy to install, took about 30 minutes for all 3 lights. Had to use the supplied light bucket due to new headlight would not fit in the stock light bucket on bike. Easy to remove with only 4 bolts and reused the same 4 bolts to reattach the new headlight bucket. unplug the old headlight and plug in the new headlight, use the supplied headlight trim ring and reattach the OEM headlight trim. I had to tighten the three adjuster bolts until they were completely tight in order to have the OEM trim ring to fit snug without any gaps. For the 4.5" side lights unscrew the bottom bolts from the trim ring. remove and take out the stock headlight by unplugging it from the harness. The supplied lights has a pig tail connected with two live wires, unplug the pigtail with the loose wires and set aside, you can now plug the side lights into the factory pigtail, make sure you plug in with the black wire running on the same side as the black wire and the red wire is on the same side as the gray factory wire. I made sure to use electrical tape to make a more secure connection, put the factory ring on the back install and then make sure the outer trim ring clips into the groove of the housing, then tighten the trim ring down making sure the lights are firmly in place. That is it, no splicing of wires, able to use the factory harness and when you have the spots on and you turn the high beam on, the spots shut off. I installed on a 2009 Electra Glide Ultra Classic