AP3054 Four Channels Ground Loop Isolator Audio Curciut Remove Noise Filter 4 RCA

Description:

Isolate and eliminate noise caused by a ground loop in an audio circuit with this Four-Channel Ground Loop Isolator.
The isolator ensures that the shield ground on each audio cable is isolated from any equipment ground, which could cause audible noise when amplified. This device has four channels, composed of two pairs of stereo (L+R) inputs and outputs.
The nominal DC impedance of the device is 100 ohms and the audio impedance is 3500 ohms at 1000 Hz. The nominal input power is 50 watts, with a maximum power level of 100 watts.

Specification:

Input: 4 Pieces RCA plugs
Output: 4 Pieces RCA sockets
Used to eliminate signal noise
Uniquely designed case

Package Includes:

1 Piece Noise Audio Filter Isolator

Note:

Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
Please check the size measurement and the picture carefully before making payment.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you.