10pcs Warm Shrink End Cap Heat Shrink Cap Waterproof Protection for Cable End

Feature:
*High quality material: Our heat shrink tubes are made of high quality thermoplastic polyolefin.
*Adhesive layer included: When the shrink tubing is heated, it automatically releases a non-adhesive layer and seals the connection extremely reliably.
*Ease of Use: The heat shrink tubing can be shrunk by heating in an oven or with a heater or other hot gas source to securely seal the connection.
*Size: 10pcs, Diameter*Length: 18×45 mm; 20×45 mm; 25×50 mm; 30×45 mm; Wall Thicknes: 1mm; Min. shrinking temperature: +70°C / min. full shrinking temperature: +110°C.
*Wide Application: Suitable for typical telecom and power cables.

Specification:
Part Name: warm shrink end cap
Material: polyolefin
Color: black
Size: As shown in the picture
Diameter*Length: 18×45 mm, 20×45 mm, 25×50 mm, 30×45 mm
Wall thickness: 1 mm
Operating temperature: -55°C - +125°C
Minimum shrinkage temperature: +70°C
Full shrink temperature: + 110 °C
Tensile strength: 10.4 MPa.
Dielectric strength: 15KV/mm

Package Contents:
10*warm shrink end cap


Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.