Features:
* Brand new and high quality
* Adopting pressure-resistant two-way bearing design, high precision and good stability. The cover design fully protects the sensor chip and uses nuts to fix the interface to prevent the interface from falling off due to strong dragging.
* Equipped with international high-quality sensor series. S-beam design, can withstand tensile and/or compressive loads (0-5000KG).
* This sensor is a high-precision test component and is easy to install. In order to ensure the accuracy of the measurement, the transmission of control force should not be affected by eccentric loads and transverse forces.
* Made of alloy steel, welded/sealed internally with adhesive to prevent oil, water, and corrosion. Safe and explosion-proof products, can be used in harsh environments and hazardous areas. Suitable for mixing stations, batching machines, asphalt stations, etc.
Specification:
Model: DYLY-103
Measuring range (optional): 10KG, 50KG, 100KG, 200KG, 300KG, 500KG, 1T, 2T, 3T, 5T
Material physical properties: conductor
Output signal: analog
Protection level: IP67
Linearity: ±0.02 (%F.S.)
Delay: ±0.02 (%F.S.)
Repeatability: ±0.02 (%F.S.)
Sensitivity: 2.0mv/v
Drift: ±0.02%F.S
Resolution: ±0.02%F.S
Input impedance: 400±20Ω
Measuring range: 0-5000kg
Application: Mixing station, batching machine, asphalt station, etc.
Wiring method:
Red--positive pole of power supply
Black--positive pole of power supply
Green--signal positive
White - negative signal
Yellow (heat-shrinkable tube covering)--shielding
Package Included:
1 x load cell
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
