Electric Dog Fence System Pet Tone Shock Boundary Containment Waterproof with 2 Collar Receiver for Small Medium Large Dog

Multiple Dogs Support: Fits all kinds of dogs weighing 4lbs+ with neck sizes from 7.5in To 17.92in. One transmitter can pair with 3 collar receivers. Note: Our package only contains dual receiver collars.

Automatic Dog Training: The collar works automatically once you install the system. It will send beep and shock as your dog try to cross the boundary wire. The closer your dog goes, the more intense the shock will be, effectively train him back to the play area you set. Your dog will naturally seek to avoid correction, and is content staying within established boundaries. Keep safe in limited space.

Adjustable Control Range: The electric fence allows you to control the width of the boundary by adjusting the knob. Customizable range up to 1.2 acres/53189Square FT. The wire break warning can tell you in time if the wire is broken. The red low-battery indicator prompt you to replace the collar battery or it cause intermittent operation.

Safe Efficient Dog Fencing System: Come with buried wires and wall-mounted transmitter, help to train dogs to shape the habit of living in their own independent space, and keep your furniture and daily necessities clean and tidy, especially keep your pets away from the uneasy of living in a real fence.

Stable Mount: This do-it-yourself weekend project lets you create an in-ground fence designed to fit your yard. Suggestion: Use it only under the supervision of dog’ owner. Do not let the collar receiver over your pet for more than 12 hours a day.

How It Works:
1) Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.
2) The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.
3) How to install the system
*Design your containment area and calculate the amount of wire needed.
*Install the wall transmitter.
*Lay out the perimeter wire.
*Connect the perimeter wire to the wall transmitter.
*Verify transmitter is functioning without problem.
*Set up the receiver and then, test the containment system and adjust the field width.
*Install the boundary wire and training flags.
*Fit collars to your dogs and train your dogs.

Friendly Reminder: Please use short probes for short-haired dogs. Use long probes for long-haired dogs. As for fence, only when a dog runs at a relatively low speed and within the range of 0.5m/1.64ft, will the fence be activated. Otherwise,the fence will not work.

Note:
*Only use it for dog, not any other animals.
*Let your dog adapt to the collar before you start training. You should allow your dog to accept the collar as a part of her life.
*When the collar in your dog, do not set the program.
*Keep away from children can touch the place.
*Please read all instructions before using this product.
*The receiver can detect the signal emitted around 1m away from the boundary when the boundary range is adjusted to minimum. The receiver can detect the signal emitted around 2m away from the boundary when the boundary range is adjusted to maximum. If your dog is small, it’s recommended to apply small field width. If your dog is large, it’s recommended to apply bigger field width.

Specification:
Brand:
Product Type: Electric Dog Fencing System
Materials: ABS
US Plug Of Remote: 100-240V
Collar Battery Type: 4LR44 6V
Runtime Per Battery: 10Days
Adjustable Control Range: Up To 5000 Square Meters/53189Square FT/1.2Acre
Pet Collar Fits Dogs 4lbs+ with Neck Sizes From 7.5in To 17.92in
Bury Wire Cable Length: 300m/984FT
Suggested Wire Bury Depth: More Than 1in Underground
Per Flag Size:8.5x19.5x0.5cm/3.34x7.68x0.2in
Charging Cable Length: 110cm/43.3in
Per Collar Strap Length: 45.5cm/17.92in
Transmitter Size: 14.3x9x5cm/5.63x3.55x1.97in
Transmitter Weight: 115g/0.26lbs
Per Collar Receiver Size: 6.5x3.5x3cm/2.56x1.38x1.19in
Per Collar Receiver w Strap Weight: 56.5g/0.12lbs
Package Size: 30*19*6.5cm/11.81*7.48*2.55in
Package Weight: 833g/1.83lbs

Package List:
1x Indoor Wall-mounted Transmitter
2x Adjustable Receiver Collars w/Neck Straps
1x Power Adapter w/ Charging Cable
2x 4LR44 6V Batteries (Installed In Receivers)
1Coil x Boundary Wire
20 x Training Flags
2x Test Bulbs
2Pairs x Extra Metal Contact Points
1Bag x Screw
1x User Manual