Car Head Up Display, Universal 5.9inch Car HUD Display MPH/KM/h Over Speed Limit Warning Plug and Play Windshield Projector with Film for Cars with OBDII or EUOBD Interface Plug

Main display information:
1.Brightness sensor
2.Water temperature icon
3.Water temperature scale
4.Engine RPM scale
5.Over speed alarm
6.Gear display
7.Multi-function value
8.Icon for engine RPM,inlet pressure,water temperature,clock,voltage,ignition angle,acceleration time for 100 Kilometers
9.Throttle position and fuel consumption
10.Multi-function value
11.Buzzer mark,engine fault,fatigue alarm,voltage alarm,data transfer
12.Speed unit
13.Calls and SMS alerts(this function is not opened now)

Specification:
Environment temperature: -40c- + 120c atmospheric pressure 86-106KPa
Relative Humidity: 10% -95% environmental noise <= 60dB (A)
Alarm sound level: "= 30dB (A)
Working voltage: 11V ~ 16Vdc (12Vdc / 350mA)
HUD Size: Approx. 150 x 85 x 14(mm)/5.9*3.3*0.6in
HUD Weight: 280g

HUD installation:
1. Know your vehicle brand,HUD work for cars with OBDII agreement or EU OBD agreement. Open the engine hood and find the sticker below it (see the below picture 1), if it has words like OBDII CERTIFIED, then it can be installed. 
2. Find out the 16 pin diagnostic link (see the below picture 2) of the vehicle and connect it well with OBDII connecting line.

Package included:
1 x HUD
1 x OBD Cable
1 x Reflecting Film
1 x Anti-slip Pad
1 x English User Manual

Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. OBDII HUD reads OBDII parameters transmitted through a vehicle’s CAN datastream, it will only work on 2008+ model year vehicles.3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.