INTBUYING Digital Flow Fuel Delivery Gun Nozzle with Electric Meter for Gasoline Diesel Petrol Oil

This new fuel transfer nozzle with electric meter is designed for factories, coach yard, gas station and househood use. Easy to clean, install and maintain. For different country use, the meter comes with 4 unit options Liters(L) / Gallons(GAL) / Pints(PT) / Quarts(QT).

Note: No battery, you need to buy it yourself.

Specifications :
Max.Pressure: 0.25Mpa
Connector: BSPF/NPT1"
Housing: Aluminum & Plastic
Flow: 25-75L/min
Precision: ± 0.5%
Usage: Diesel,Kerosene,Gasoline
LCD Display: 6-digit
Operating Temperature Range: -10°C to 60°C
Powered by: 2 x AAA batteries.

Features:
1. Portable lightweight and durable
2. Economic environmental protection use.
3. High sensitive display
4.The nozzle is punch-formed at one time.
5.Simple operation, long service life, brand new, comfortable to use

Applications:
Suitable for Fuel ,Gasoline, Kerosene Diesel ,Petrol and so on.

Instructions:
Reset to “0”
press “DISPLAY” for 1second reset to zero.

Cumulative Total
press “CALIBRATE” indicating the cumulative total fueling. When the cumulative total reaches a maximum reading 999,999, it will automatically reset to zero.

Calibrate adjusting
press“CALIBRATE” and hold for 3 seconds, press “DISPLAY” or “CALIBRATE” for adjusting. For example, when the meter shows 103L while the liquid comes 100L put the figure 103/100=1.0300. And the computer display is programmed to turn back to stand-by situation after 5 seconds.

Units Switch
press“CALIBRATE” and hold for 3 seconds, press “DISPLAY” for 5 times and then press“CALIBRATE” for units swith among Liters(L) / Gallons(GAL) / Pints(PT) / Quarts(QT). . And the computer display is programmed to turn back to stand-by situation after 5 seconds.

Maintenance:
The meter is virtually maintenance-free. However, it is important to make sure that the rotor moves freely. Keep the display clean and free of contaminants. If the rotor does not turn freely, apply a penetrating lubricant on the rotor, shaft, and bearings. Remove any debris or deposits from the rotor by using a soft brush or small probe. Be careful not to damage the turbine rotor or supports. Replace batteries when “L Bat” comes. For the most accurate display, make sure there is no air in the system before using and meet the gun’s minimum flow rate requirements.

Item included(144001):
1*INTBUYING Digital Flow Fuel Delivery Gun
1*Adaptor