Metal Welding Bead Processor Machine 1000W

Good Material: It is composed of metal chassis, plastic and metal hardware, which makes it very strong, durable, stable performance and has a long service life.

Save Effort: You need to operate it to scrub back and forth on the weld several times, and the oxidation black spot will be cleaned immediately. It flexibly removes small gaps and hard-to-touch places, and avoids manual polishing.

-----------------------------------

How to Use

Plug the power supply into AC220V, connect the gun to the corresponding terminal, plug in the control line, turn on the power switch, then the power indicator (i.e. red light) is on. Stick the processing gun with the processing liquid, press the microswitch, and wipe against the black weld bead. After treatment, wipe with a damp cloth or water for better results

(For work such as short-circuit processing gun and workpiece, the machine will automatically disconnect the power supply to stop working, just wait 1-2 seconds can continue to work)

Application: It is suitable for welding metal, arc welding, laser welding, etc. It can be used for welding metal components of various materials and shapes, such as automobiles, aircraft, ships and other vehicles, and can also be used to clean up yellow spots, black spots, marks left by materials in the industrial process, etc.

-----------------------------------

Specification

Material: Metal, Plastic and Hardware

Process: Polishing

Plug Type: US Standard

Input Voltage: 110V

Output Voltage: 0-34V

Power: 1000W

Frequency Adjustment Range: 0-34Hz

Brush Hair Length: 70mm/2.76inch

Package Size: 52*19*31cm/20.47*7.48*12.2inch

Product Size: 26.6*14.8*30cm/10.47*5.83*11.81inch

Gross Weight: 5.2kg/11.46lb

Net Weight: 2.6kg/5.73lb

-----------------------------------

Package Included

1*Welding Bead Processor

1*Advanced Handling Gun

1*Ground Wire Clamp

1*Silicone Positioner

4* Hairbrushes

1* Copper Head

1*English Manual

All Accessories for Installation

Notes

1. Wear a mask, goggles and gloves to use this machine, to prevent the treatment liquid from spraying into human eyes.

2. Please do not switch the machine panel to connect the workpiece and the processing gun line.

3. The gun must be wrapped with processing cloth when using the copper head.

4. Products must be used with cleaning agents (not included).

5. Only need to replace the bristles, stainless steel head can be reused.

6. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

-----------------------------------